"State of the Art" 6 Car Transporter - Canepa Design Peterbilt Custom Tractor

Transporters |Just Arrived

"State of the Art" 6 Car Transporter - Canepa Design Peterbilt Custom Tractor

Exterior Color
Interior Color
Interior Surface



Click here to view high resolution photos

Trailer or Tractor can be purchased separately

Original Build Cost $1,000,000 PLUS!
“State of the Art” 6 Car Semi-Trailer
Peterbilt 587 Canepa Design Special Edition (Canepa Design Aero composite bumper/spoiler, side skirts, upper/lower fairing extensions, auxiliary fuel storage, Speedline wheels Etc.)
6,000 lb Capacity Liftgate, Adjustable Interior Decks, Genset, Air compressor, Nitrogen Storage Racks, Tools/Parts Cabinets, Closed Storage Etc.
Concept Custom Driver’s Lounge/Changing area, Air Conditioning, Closets, Storage, 110/220, Interior/Exterior Lighting, 76’ Awning, Observation Deck Etc.

VIN for Peterbilt: 1XP4D49XOCD138680
VIN for Trailer: 1KKVD52263L211475

Concept Transporters has never been known for building the average, the minimum, or the basic. When Bruce Canepa founded the company, he envisioned bringing his design skills and intense attention to detail to the trucking/transportation industry. 35 years working with major automotive and truck manufacturers, clients asking for projects that few could undertake and bring to reality, Concept Transporters has become synonymous with forward thinking, design, quality, ingenuity, and utility.

The vision of this project started with a Peterbilt 587. Bruce wanted to create the ultimate transporter to fulfil the demands of transportation for specialty vehicle to race or show events. With a complete “Canepa Design” aero kit including front bumper, full-length sides skirts and front spoiler, along with a lowered front suspension, give the Peterbilt a unique and stylish look. In addition, the Peterbilt also received upper and lower composite fairing extensions, which allow for access to the back of a custom sleeper storage compartment. The tractor also includes DOT aluminum race fuel tanks with pumping system with a capacity of 255 gallons.

On the exterior, the Peterbilt received the Canepa Design Monochromatic paint option which includes side rear view electric mirror assembly, CB antenna bases, door handle assemblies, cab grab handle bases, bumper/spoiler assembly, side skirts, etc. Graphite metallic finishes including front grill insert and hood side air vent screens. To finalize, the Speedline European wheels were powder-coated in graphite metallic along with the wheel hub covers.

Behind the Peterbilt, is a “state of the art” Concept Transporter 6 car semi-trailer. Featuring a 6,000lb hydraulic liftgate, Concept interior ramp system with hydraulic rear ramp for larger cars, driver’s lounge, air compressor package, observation deck, enclosed awning package (including awning extensions to end of liftgate and tractor), and others listed in detail bellow.

Complete, ready to go, and loaded with features to make any automotive event as easy and enjoyable as possible.

Peterbilt 587 Canepa Design Special Edition

•Canepa Design Aero front composite bumper/spoiler
•Canepa Design Aero full length composite side skirts with rear access integrated steps
•Canepa Design sleeper upper composite fairing extensions
•Canepa Design sleeper lower composite fairing extensions—hinged/opening feature for access to back of sleeper storage compartment (access from driver and passenger side)
•Canepa Design monochromatic paint option—side rear view electric mirror assemblies, CB antenna bases, door handle assemblies, cab grab handle bases, bumper/spoiler assembly, side skirts, etc. Graphite metallic finishes including front grill insert and hood side air vent screens
Back of sleeper storage box including rollup door access driver/passenger side, interior shelf, and race gas fuel pump system, (height 60’, with 36’. Length 67.5)
Full width/length aluminum deck plate behind sleeper including frame covering to back of chassis (powder coat graphite metallic)
Lowered front suspension
“King” gas shock assemblies
Speedline European wheels (powder coat graphite metallic)
Wheel hub covers (graphite metallic finished) with gloss black lug nut covers
“Race fuel” auxiliary tanks (2), 255-gal capacity

Special Edition Options $205,000

Peterbilt 587 Factory Specifications

Model: Model 587
Type: Tractor
Description: 567 prem
Intended Serv.: General Freight
Commodity: other Commodity
Type: 0
Length (ft): 0
Height (ft): 0.0
Max Laden Weight (lbs): 0
No. of Trailer Axles: 2
Type: Van
Length (ft): 53
Height (ft): 13.5
Kingpin Inset {in): 42
Comer Radius (in): 1
Length (ft): 65
Width (in): 102
Height (ft): 13.5
Fr Axle Load (lbs): 13200
Rr Axle Load (lbs): 40000
G.C.W. (lbs): 80000
Road Conditions:
Class A (Highway) 100
Class B (Hwy/Mtn) 0
Class C (Off-Hwy) 0
Class D (Off-Road) 0

Maximum Grade: 6
Wheelbase (in): 275
Fr Axle to BOC (in): 71.8
Cab to Axle (in): 203.2
Cab to EOF (in): 258.2
Special Req.
California Registry

Model 587
Other Commodity
General Freight
California Registry
SmartWay Compliant - Not Selected or Unavailable

Frame & Equipment
10-3/4in Steel Rails 355-384in
Aluminum Frame Rail Crossmembers Ipo Steel
Custom Wheelbase
Fifth wheeI Bolted IPO Huck Fastened
EOF Tractor Tapered with Xmbr
Omit Rear Mudflaps and Hangers
Hogebuilt Stainless Steel Quarter Fenders
Holland FW31 Fifth Wheel, No Lube Top Plate
Fifth Wheel Setting Behind C/L Bogie 18in
LH Fifth Wheel Release
Kingpin Air Release System, Cab Mounted Controls
9.4-10.4in Fifth Wheel Height, Holland
32 or 36 In Air Slide
No Access Package or Deck Plate Desired

Front Axle & Equipment
Peterbilt Front Air Leaf, Shocks 13,200 lb
Power Steering TRW THP60
Power Steering Reservoir Frame Mounted
PHP10 Aluminum LMS Hubs
Dual ·Haight Control Valve
5" dropped axle
Dana Spicer Wide Track IPO Std, Front Axle
Air Disc Front Brakes

Rear Axle & Equipment
Dana Spicer DSH40 40,000 lb, High Performance 40
PHP10 Alum LMS Hubs
Long Stroke Parking Brakes, Drive Axle(s)
Bendix Smart A TC Traction· Control
Rear Brake Camshaft Reinforcement
Anti-Lock Braking System (ABS) 454M
Synthetic Axle Lubricant Ail Axles
Air Disc Rear Brakes
Ratio 3.25 Rear Axle
Peterbilt Low Low Air Leaf 40,000 lb
(4) Heavy-Duty Gabriel Truckmaster Shocks
Dash Mounted Dump Valve with Indicator Light

Engine & Equipment
ISX15600/2000 [email protected]
CARB Engine Idling Compliance
160 Amp Alternator, Long Brush
Immersion Type Pre-Heater 110-120V
PACCAR 12V Starter
4 PACCAR Premium 12V Dual Purpose Batt 2800 CCA
Intellitec Big Boy Battery Disconnect Switch
LVD (Low Voltage Disconnect)
18.7 CFM Air Compressor
lntebrake (Furnished on Engine)
High Efficiency Fuel/Water Separator, Heated 12V
Engine Protection Shutdown
High Efficiency Cooling System
(1) Air Cleaner Firewall Mounted
Exhaust Single Horizontal LH

Transmission & Equipment
FO20E318B-MXP Ultrashift Plus
SPL250HD-XL Driveline With Two Midship Bearings
SPL 170-XL lnteraxle Driveline
Alum Transmission Bell Housing ipo Iron
Chrome Transmission Shift Lever
Remote Lube Hoses for Release Bearing and Cross
Flex Hose for Release Bearing and Cross Shaft Lub
Remote Lube Hose For Release Bearing
Solo Clutch Ipo Easy Pedal

Air & Trailer Equipment
Bendix AD-IS Air Dryer with Heater
Nylon Chassis Hose
Painted Aluminum Air Tanks
Clear Outside Frame of Ali Air System Components
Clear Outside Frame of All Air System Components
Trailer Hand Valve (Self Returning)
Hose Tenna Mounted on LH Rail
Chroming of Hose Tenna
12ft A&E Lines Coiled & Two 7-Way Plugs
A&E Connections BOC/BOS with Hose Tenna
Locate A&E Connections BOC/BOS as far rearward

Tires & Wheels
FF: MN 16ply 27 5/80R22.5 XZA-3
RR: MN 14ply 275/80R2.5 XDA-5
Code-rear Tire Qty 08
FF: Petertbilt 886677 LvL 1 22.5x8.25 Alm Whl
RR: Peterbilt 886677 LvL 1 22.5x8.25 Alm Whl
Code-rear Rim Qty 08
FF: Polished Wheels
RR: Wheels - Tandem Drive
26in Aluminum 150 Gallon Fuel Tank RH BOC
Location RH BOC 150 Gallon
Location LH BOC 150 Galion
Fuel Tank Fill Forward
Locate BOC Fuel Tanks Forward As Far As Possible
(2) Shut-Off Valves On Fuel Supply Lines
Locking Fuel Tank Cap{s)
DEF Tank Mounted RH BOC
DEF Tank Aero

Battery Box, Bumper, Cab & Equipment
Alum Battery Box LH U/C, Polished Door & Step
Rubber Battery Pad in Bottom Of (1) Battery Box
Alum Tool Box RH U/C, Polished Door & Step
Molded Aero Bumper One Piece Painted
Chassis Aero Fairings
Alum Cab Long Length BBC Fiberglass Hood SBFA
Premium Length High Roof Sleeper w/Premium
Thermal Insulation Pkg Premium Length High Roof
Second Bunk in High Roof Sleeper
TV Package in Sleeper - Passenger Side
Additional 12 Volt Power Driver Side
Partitions For Upper Cabinets Driver Side
Lower Office Cabinet w/Refrigerator-Incls Middle
Gear Strap, TV Type - Driver Side Cabinet
Atlas 80 Driver Seat
Atlas 80 Passenger Seal
Arm Rest RH Only Driver Seat
Arm Rest LH Only Passenger Seat
Air Ride Driver
High Back Driver
Air Ride Passenger
High Back Passenger
UltraLeather Driver (Atlas Only)
UltraLeather Passenger (Atlas Only)
Power Door Locks Both Doors
Leather Steering Wheel ipo Standard
Saharan Tan Interior
Privacy Curtain Around Windshield
Woodgrain A & B Dash Panels IPO Charcoal
Exterior Transition Grab Handles
One Piece Curved Windshield
Lower sleeper Side Windows w/Screen (Opening)
Combo Fresh Air Heater/Air Conditioner
Peterbilt Comfort Control - Sleeper
Outside Sunvisor Painted Composite
Aero Bright Mirrors Ea Side Heated and Motorized
(1) Air Horn 15in Painted
ConcertClass Satellite Audio System with CD
CB Radio w/Weatherband, (2) Raml Antennas
XM Satellite Radio Service Provider
Plug-In Auto Reset Circuit Breaker
Removable Bugscreen Behind Grille
Peterbilt Electric Windshield Wipers
Xantrex 1000 Watt Inverter
12 Inch Sleeper Extender w/6 Inch Rubber Flap
Triangle Reflector Kit Shipped Loose
5 Lb 3A:40bc Fire Extinguisher Cab Mounted
Trans Temp Gauge Main
Axle Temp Gauges Tandem Drive
Oil Temperature Gauge - Engine
Air Application Gauge
Air Restriction Gauge On Dash
Air Restriction· Indicator - Filteiminder Mounted
Buzzer on Air Suspension Dump Valve
Manifold Pressure Gauge
Peterbilt Analog Electric Clock Dash Mounted
Digital Alarm Clock Sleeper Mounted
Suspension Pressure Gauge
(3) Additional Electric Rocker Switches
Main Instrumentation Panel/Graphics Display
Omit Fan Clutch Override switch
Custom Nameplate
Headlights Composite Fender Mounted w/lntegral
Marker Lights (5) Aero LED
Fog Lights (2) Peterbilt
Daytime Running Lights
Trucklite 40242R Stop/Turn/Tail
(1) Switch & Wire F/O Loadlight

Paint Color Selection within Paint Deck
(1) Color Dupont Two Stage -Cab/Hood/Slpr

Options Not Subject To Discount
Engine Surcharge - 2010 MX/ISX15/ISX11.9

Premium Length Slpr / Premium Interior (PP)
Presentation Created Using Vocational Specialist

Peterbilt Manufacturer Price: $216,297
Special Edition Options $205,000

Total Price Canepa Edition Tractor: $421,297

Concept “6 Car / Race Support” Semi Trailer

Rivetless 53’ Drop Tandem-axle Trailer:
• 36" king pin setting.
• 42' center of king pin to center of rear axle.
• Coupler height 49-1/2".
• 13'-6" overall height.
• 144" fifth deck. (Interior length)
• 106" floor to ceiling forward of drop.
• 143” floor to ceiling rear of drop
• 138" floor to ceiling from wheel box to rear.
• 4" steel 1-beam floor sills on 16" centers.
• Neway air-ride suspension.
• Rockwell 3" dropped axels.
• Meritor WABCO anti-lock brakes: (4 sensors-2 modules) 16-1/2" x 7" brakes.
• Low profile 22.5” 16 ply Goodyear radial tires.
• 1-3/8" ship-lapped laminated hard wood floor.
• Special radius front corners, with glad-hands and plug assembly to roadside.
• Plastic covered rear roll-up door with secondary side seals.
• .040 One-piece stretched aluminum roof.
• Steel roof bows on 24" centers.
• .90 smooth side aluminum paneling.
• Mud flaps.
• 14-gauge galvanized logistic posts on 16" centers, double slotted

Concept Custom Exterior Trim Package:
• Concept custom aluminum tandem fenders.
• Custom rear tapered transition panel from fenders to rear of trailer: radius bottom edge, covers full side rail extrusion.
• Concept custom aluminum quarter fenders.
• Rivetless quarter panel extension with supporting framework: Curbside quarter panel opens to access storage compartment between landing legs.
• Custom formed full length side rail cover: formed with radius on bottom edge, angled at drop and shaped over wheelbox opening

Concept Custom Side Access Double Door:
• 60" x 84" double door.
• 10-ga. formed structural steel perimeter doorframe inside trailer wall.
• 12-ga. Stainless steel to door header.
• Structural reinforcement added to cross members and floor in door area.
• Composite door construction.
• Rivetless interior and exterior construction.
• Brushed stainless steel door perimeter trim.
• Lightweight 14-ga. formed steel door structure.
• Steel door frames, powder-coated.
• .050 5052-H32 pre-painted white aluminum exterior panel.
• .050 5052-H32 pre-painted white aluminum interior panel with extruded aluminum edge molding.
• All steel surfaces primed for rust prevention.
• Recessed polished stainless steel Furgocar lockable door latch with concealed hardware.
• Corner mounted door seal.
• Stainless steel continuous hinge with internal compression seal.
• 12-ga brushed stainless steel threshold and entry frame.

Concept Deluxe Nose Mount Generator Package:
• Complete custom built nose mount enclosure: Rivetless exterior, custom radius front corners, no exterior side vents, box flush with top of trailer.
• Steel tube frame construction, painted black.
• Deluxe sound suppression package: Complete enclosure, full generator compartment back wall, trailer front wall insulation.
• (4) Aluminum doors with lockable latches and full length vinyl covered stainless steel hinges.
• 20kW water cooled diesel generator, mounted on top shelf.
• Remote start panel with gauges mounted inside trailer.
• Custom built aluminum shroud to duct radiator air up through the top of the enclosure. Expanded metal screen and integrated water drain.
• Custom built generator exhaust. Heat wrap insulation installed on complete exhaust system.
• Dedicated generator start battery with custom built battery enclosure and tie-down.
• 110V “forced air” squirrel cage fan blower.
• Approximately 70 gallon diesel fuel tank with sight gauge.
• Provisions for A/C evaporator and Air Compressor on middle shelf.

Concept 6,000 lb. Hydraulic Liftgate: (New Style)
• Custom platform with integrated radius corner caps.
• 144" 3/16" 6061-T6 smooth aluminum load surface.
• Complete load surface sprayed with rubberized truck liner. (Light Grey in color.)
• Lightweight steel frame platform construction.
• Rivetless .090 aluminum exterior skin.
• (6) Recessed polished stainless steel LED taillights.
• Provisions for (2) license plates.
• Custom built slide-out extension for loading low ground clearance cars.
• New style connection for tail-light to trailer connection.

Concept Custom Interior Ramp System:
• Full length ramps from rear of trailer to drop.
• 17ft Rear section of ramps: 5500lb capacity.
• Remaining section to drop: 3500lb capacity.
• Lightweight aluminum tube frame construction.
• Formed aluminum load surface.
• Installed at a height of 27-1/2” from main floor to top of ramp.
• Aluminum tie-down track on inside vertical edge of ramps.
• Designer rubber load surface.
• Custom built stainless steel access doors under ramp system. Doors to hinge up, then slide in under load surface. Nitrogen bottle rack system.

Concept Custom Hydraulic Deck:
• 17’-0” long platform at rear of trailer.
• 3500lb car capacity.
• Deck lowest position to be even with fixed deck and travel up approximately 36”.
• “Wireless” remote operation.
• Lightweight steel frame platform construction with open center.
• Riveted 3/16” aluminum load surface.
• Rivetless brushed stainless steel under ramp sections on bottom surface.
• Hydraulic cylinders and vertical support tubes recessed into walls of trailer.
• Power unit from liftgate used to control deck.

Concept Custom Fixed Deck:
• Full length ramps from front of hydraulic deck to drop.
• 3500lb car capacity.
• Installed at a height of 56-3/4” from top of deck to ceiling.
• Lightweight steel construction.
• No lower angle supports, open full width under ramp system.
• Open center construction. 27” wide ramps on each side with center open around supporting framework.
• Powder-coated gloss white finish.
• Aluminum tie-down track on inside vertical edge of ramps.

Concept Custom Adjustable Fold-Up Deck:
• From drop of fifth deck to 48” from front of trailer.
• 3500lb car capacity.
• Installed at a height even with adjustable ramp system.
• Composite aluminum and steel construction
• Powder-coated gloss white finish.
• Sections to fold-up against wall and lock into place.
• Aluminum tie-down track on inside vertical edge of ramps.

Concept Custom Nitrogen Bottle Rack:
• Integrated under lower ramp system rear of side access door.
• Brushed stainless steel construction.
• Store (4) “K” series nitrogen bottles and clearance for regulators on each bottle.
• Complete nitrogen line system installed with (4) exterior outlets under curbside of trailer and one interior outlet near nitrogen bottle rack.
• Coupler style
• Ramp system to be open around nitrogen bottle rack: No doors on end or sides surrounding rack.
Concept Custom Driver’s Lounge:
• Front wall of fifth deck.
• Clear anodized aluminum frame cabinet construction.
• Laminate cabinet door faces.
• (2) Wardrobe cabinets.
• Small stainless steel sink and counter.
• Mirrored stainless steel panel above sink.
• Insta-hot hot water heater.
• Fresh water tank, grey water, and water pump, all mounted in front wall custom enclosure.
• Fresh water fill, grey water flush out, and grey water dump valves located at front of trailer exterior.
• Dump tube storage tank mounted in custom storage compartment under fifth deck.
• Water pump switch and water monitor panel mounted below sink inside base cabinet.
• General storage cabinets.
• Flat Screen TV and satellite system.
• (2) Fold down benches for sitting: (1) along each wall.
• A/C system.
• Canvas wall separating drivers lounge and main trailer area. Zippered door in center.

Concept Custom Deluxe Electrical Package:
• All conduit concealed and hidden wherever possible.
• 100A / 240V Main electrical panel mounted just inside side access door.
• 100A Transfer switch.
• 50A / 240V Shore power connection.
• 50A / 240V 25ft. Shore power cord (open connections on one end.)
• (10) Corner mount fluorescent lights mounted in top corners of trailer: (5) per side, spaced evenly
• 300W Inverter / Charger with remote panel. Inverter to power all fluorescent lights, some 110V outlets, and TV. Charger to maintain house battery bank.
• 50A/ 120V Sub-panel for all “inverted” components.
• House battery system: (4) Group 27 deep cycle marine batteries mounted in custom enclosure behind fender well on curbside of trailer.
• Inverter mounted behind fenderwell on curbside next to batteries.
• Complete 110/220V electrical system including all conduit, wires, and terminations for all of the following:
o (1) 20A 220V outlet mounted near main electrical panel.
o (6) 15A 110V single gang electrical outlets with weather proof covers mounted under curbside exterior of trailer.
o (3) 15A 110V single gang electrical outlets installed along curbside interior of trailer.
o (1) 15A / 110V single gang electrical outlet for TV.
o (1) 15A / 110V single gang GFI outlet mounted near sink in driver’s lounge.
o (4) 15A / 110V single gang outlets with weatherproof covers installed near top of trailer for awning fan electrical connection. Outlets switched at panel inside of side door.
o (4) Custom 35W Metal Halide light fixtures mounted in recessed stainless steel enclosures on curbside of trailer. Ballasts for light fixtures mounted in corner mount light raceway.
o (2) Custom 35W Metal Halide light fixtures mounted to top of screw deck columns for load lights. Ballasts for light fixtures mounted in corner mount light raceway.
o (1) 220V switch and power supply for 220V liftgate pump / motor combination.
o 110V power to A/C condenser and evaporator.
o 110V switched power to air compressor.
o 110V power to forced air blower in nose box.
o 30A / 110V circuit for insta-hot hot water heater.
o 220V and 110V power supply to ball-screw deck control and power circuits.
• Complete 12V electrical system including all wires and terminations for all of the following:
o (1) Main 12V fuse panel.
o Remote solenoid master 12V disconnect with LED indicator light.
o (1) 12V water pump.
o (1) 12V water monitor system.
o 12V circuit for satellite system.
o (2) 12V powered roof vents with remote switches.

Concept Custom Trailer Modifications:
• Hydraulic landing leg system. 12V Power unit mounted between landing legs. 12V power supply to run off of house battery system. Warning light on trailer when legs are down.
• Recessed track on main floor next to ramps full length, both sides.
• Speedline aluminum wheels, powder-coat graphite metallic finish.
• Black lug nut covers and graphite metallic finish axle covers.
• Structural drop braces installed behind quarter fender panels.
• 1” rigid foam insulation installed in ceiling.
• 1” rigid foam insulation installed in walls.
• Spray ceramic insulation on trailer roof in front of observation deck.
• Spray ceramic insulation in walls on fifth deck.
• White plastic insert panels between logistic posts.
• Rubber flooring on full fifth deck.
• (2) Rows of surface mounted tie-down track on floor next to walls from drop to front of cabinets on front wall.
• Roll-up door hardware removed, chrome plated, and re-installed.
• Full Rivetless pre-painted white aluminum ceiling.
• Custom full brushed stainless steel trim package. Brushed stainless steel trim installed in trailer wherever necessary to cover trailer gusset plates, main drop plate, etc.
• Custom removable aluminum stairs to fifth deck. Stairs to clip into place and allow access to fifth deck, yet removable to gain access under lower ramp system.
• (2) 12V powered roof vents with remote switches.
• Storage racks on side doors.
• Clock on side door.
• Cork board and dry erase board on side door.
• (2) 8ft. long removable exterior T-slot mounted workbenches with support legs to bottom rail of trailer mounted on curbside of trailer.
• All exterior lights converted to “clear lens” LED fixtures.

Concept Custom Air Compressor Package:
• 3HP Air compressor mounted middle shelf of nose box.
• Air compressor modified for permanent mount installation.
• (6) Exterior curbside air outlets under trailer.
• (3) Interior curbside air outlets along wall.
• Remote on/off switch located inside side access door.
• Remote system gauge located inside side access door.
• Fully automatic head pressure relief system to allow soft low amperage starts.

Concept Custom Observation Deck:
• 20 ft long x 8.5 ft wide.
• Mounted at rear of trailer.
• Additional structure added to roof of trailer.
• 1-1/4” dia. fully polished stainless-steel tube frame construction.
• All rails fold down on roof of trailer or store on roof of trailer. No frame members store inside trailer.
• 5oz. grey Dacron sail cloth center ridge canopy.

Concept Custom Collapsible Observation Deck Access Stairs:
• (2) Separate stairs: (1) from ground to liftgate platform, (1) from gate to roof of trailer.
• Aluminum and stainless steel construction.
• Stairs collapse flat for storage.
• 1-1/4” dia. fully polished stainless steel handrails.
• (2) Rubber rollers at base of stairs.

Concept Custom Awning Package:
• 22ft. projection x 51’ 8-3/4” x 86 eve height* (Total awning length = 76 ft).
• Lightweight anodized aluminum frame construction.
• Aluminum and stainless steel mounting hardware.
• Lightweight radiused corner rectangle rafter poles with spinnaker ends.
• High quality water resistant grey 5oz. Dacron sail cloth main canvas.
• Custom zip-off bead track strip for easy set-up and tear-down.
• Zippered rafter pole pockets.
• Buckle straps on all horizontal poles.
• High quality water resistant grey 5oz. Dacron sail cloth full enclosure walls (with black vinyl soil skirts.)
• Zippered vertical posts pockets.
• (2) Custom end vents (1) each end. End vents to extend to the mid-span pole on the awing frame and match the profile of the awning end.
• (5) Rain drains, (1) each bay.
• Heavily reinforced at chafe and stress areas.
• Complete black vinyl bag set: including (1) main canvas tube bag and (1) standard canvas bag for side walls and observation deck canopy.
• Complete tie-down kit: includes spikes, posts, ropes with brass clasps, hammer, and storage pouch with bag.
• Custom rafter pole storage brackets to store all rafter poles below second level deck.
• Custom pole storage provisions. All poles to store between landing legs, under nose box, under deck, and on walls. No poles store in bags.
• Custom electrical provisions in (4) center rafter poles.
• Electrical pigtails to connect rafter poles to trailer.
• (4) Custom mounted fans, rafter pole mounted lighting.
• (1) Custom built fan storage rack for transporting fans.

*Concept Custom Awning Front Extension Package:
• 22ft. projection x 12ft. long.
• Hip roof style construction
• Lightweight anodized aluminum frame construction.
• Aluminum and stainless steel mounting hardware.
• Lightweight radiused corner rectangle rafter poles with spinnaker ends.
• High quality water resistant grey 5oz. Dacron sail cloth main canvas.
• Zippered rafter pole pockets.
• Buckle straps on all horizontal poles.
• High quality water resistant grey 5oz. Dacron sail cloth full enclosure walls (with black vinyl soil skirts.)
• Zippered vertical posts pockets.
• Heavily reinforced at chafe and stress areas.
• Custom rafter pole storage brackets to store all rafter poles below second level deck.

*Concept Custom Awning Rear Extension Package:
• Mirror image of front extension.
• 22ft. projection x 12ft. long.
• Hip roof style construction
• Lightweight anodized aluminum frame construction.
• Aluminum and stainless steel mounting hardware.
• Lightweight radiused corner rectangle rafter poles with spinnaker ends.
• High quality water resistant grey 5oz. Dacron sail cloth main canvas.
• Zippered rafter pole pockets.
• Buckle straps on all horizontal poles.
• High quality water resistant grey 5oz. Dacron sail cloth full enclosure walls (with black vinyl soil skirts.)
• Zippered vertical posts pockets.
• Heavily reinforced at chafe and stress areas.
• Custom rafter pole storage brackets to store all rafter poles below second level deck.

Concept Custom Exterior Paint:
• Light gray, including top and bottom rails.

Concept Custom Accessory Package:
• Wheel chalks for use in loading and unloading cars.
• (40) Ancra tie down clips.
• (30) 2” Adjustable ratchet straps: 1ft. fixed length, 8ft. adjustable. Blue in color with no logos on straps.
• (20) 1” Adjustable ratchet straps.
• (20) E-to-D straps.
• (30) Axle straps with protective sleeve.

Total Price $867,000

The above vehicle information is complete and accurate to the best of our knowledge at the time it is posted to this website. Corrections or additional information is always appreciated. All advertised prices exclude government fees and taxes, any finance charges, any dealer document preparation charge, and any emission testing charge. Vehicles are subject to prior sale. All advertised to be true but not guaranteed. We assume no liability for errors or omissions.
1 ‐ 831 ‐ 430 ‐ 9940
call us about this vehicle


    Canepa's commitment is that every detail of each vehicle in the inventory has been brought to the highest levels of refinement by the finest craftsmen in the automobile industry...